LFS Series High-Flow Pleated Filter Cartridge

The LFS Series High-Flow Pleated Filter Cartridge is designed for industrial liquid filtration where stable flow and effective particle removal are important. Its pleated filter media provides a large filtration area, helping handle high-volume water and process liquids while protecting downstream equipment and supporting consistent filtration performance.

แบ่งปัน：

ติดต่อเรา

การขอใช้บริการออนไลน์

จดหมาย：trade@yhenv.com

วอทส์แอพพ์：8618353281502

บทนำโดยละเอียด

LFS high-flow pleated Filter Cartridges use a deep-layer fine polypropylene fiber membrane as the filter media, with a diameter of 6.5"/165mm.

The larger diameter increases the effective filtration area, reducing the requirements for filter size and the number of filter cartridges during use.

This design significantly reduces equipment and labor costs, and is more convenient to operate. It features internal PP frame support and a single opening.

The filter is specially designed with an outside-to-inside liquid flow direction to ensure that all pollutant particles are intercepted on the outside of the filter element, making it widely applicable.

It is widely used in different fields.

Design parameters

Specifications (diameter * length)	Design flow rate (m³/h)	Maximum flow rate (m³/h)	Filter area (m2)
6.5**20"	15	40	3.3
6.5**40"	30	80	6.5
6.5**60"	45	110	8.5

Material Structure

model	PP	GF
Filter media	Deeply folded polypropylene	Resin-based synthetic glass fiber/polyester
Support/Guide Layer	polypropylene	Polyester
End cap	Glass fiber reinforced polypropylene	Glass fiber reinforced polypropylene
outer protective sleeve	polypropylene	Polyester

Interface type

LFS	40	PP	0050	E	S
LFS	length	Material	accuracy	sealing ring	Interface
	20=20"	PP	0010 = 1 μm	E = EPDM	S = skeleton
	40=40"	GF	0030 = 3 μm	S = Silicone rubber	W = Netting
	60=60"		0050 = 5 μm	F = Fluororubber
			0100 = 10 μm	N = Nitrile rubber
			0.150 = 15 μm
			0250 = 25 μm
			0400 = 40 μm
			0700 = 70 μm